APPLICATIONS
The same image or pattern, printed on
· aluminium
· stainless steel
· stone panels
· glass
· etc…
Interior and exterior applications
From walls and ceilings to restaurants, bars, wet units and furniture, our panels work indoors and outdoors.
MATERIALS
Panel build-up and thickness are specified for each project
· honeycomb
· honeycomb + stainless steel
· aluminium
· aluminium + stainless steel
· stainless steel
· honeycomb + stone
Panel build-up and thickness are specified for each project.
From single metal sheets to lightweight honeycomb panels.
The surface can be printed, finished in a solid color or covered with 3 mm stone.
PRODUCTION
Openings made at the factory
Your drawings:
· shape
· dimensions
· finish
Ready-made panels:
· cut-outs
· curves
· hatches
· light
Result:
· no cutting or fitting on site
Printed, cut, finished
Made to your drawings and dimensions. Delivered ready for installation.
TESTING
Complete test cycle - marine conditions, from Miami to Alaska and back
Miami
32 °C · heat, humidity, UV and salt air
Independent Testing By
Tallinn University Of Technology, Marine Technology Competence Centre
Alaska
+1 °C to −20 °C · freeze
Estimated equivalent
8 cycles ≈ 3–4 years; 25 cycles ≈ 10–15 years of exposure
Tested in a combined cyclic corrosion, UV and temperature programme based on EN ISO 11997-2:2025 Annex A and ISO 11997-1:2026 Cycle A.
01
Clean and prepare panels, apply printed or coated finish, record baseline measurements
02
UV radiation, high temperature, dry
03
Neutral salt spray (NSS), high humidity, elevated temperature
04
Controlled drying, return to lower humidity
05
Condensation without spray, high humidity
06
Low temperature, freeze–thaw cycle, thermal stress
0 hours
24 hours
24 hours
24 hours
24 hours
24 hours
07
Cycle complete
Ready to repeat. 1 cycle = 5 days / 120 hours
Marine certification
Several in-house fire tests have been carried out during development, with positive results.
IMO / MED certification planned for end of 2026.
TEAM
Dedicated professionals driving our success
Christopher Teder
CEO · CO-FOUNDER
+372 5218596
christopher@panelcoating.com
Leads PanelCoating from idea to product, drawing on more than 9 years as an entrepreneur and experience in the marine industry.
